- -- -- see engineering for rev. a-e f 07/02/04 sm see ecn #816 for changes g 10/01/04 sm see ecn #818 for changes h 01/14/05 sk see ecn #914 for changes i 03/23/05 sk see ecn #968 for changes j 07/10/07 sk ecn #1337 for changes k 12/03/07 sk see co 200077 for changes length "l" date engr. type a c see table part # chkd: app: dwn: dt: sheet size: sheet: file #: 1 of 1 a 07/02/04 - ss sm - final dwg in in [mm] richco, inc. eng@richco-inc.com (773) 539-4060 re: richco, inc. print solidworks created using description round spacers series title: ang.=1 tolerances unless noted .xx=.010 .xxx=.005 frac.=1/64 rev. notes: 1. material: pvc, rigid (rms-11). 2. color: light gray. *parts available by special order "a" "b" for #4 screw for #6 screw for #8 screw for #8 screw for #10 screw for 1/4 bolt for 3/8 bolt 1/4 [6.4] ss4-2 ss6-2 ss8-2 ss8-2l ss10-2 ss1/4-2 ss3/8-2 3/8 [9.5] ss4-3 ss6-3 ss8-3 ss8-3l ss10-3 - ss3/8-3 1/2 [12.7] ss4-4 ss6-4 ss8-4 ss8-4l ss10-4 ss1/4-4 ss3/8-4 5/8 [15.9] ss4-5 ss6-5 ss8-5 ss8-5l ss10-5 - - 3/4 [19.1] ss4-6 ss6-6 ss8-6 ss8-6l ss10-6 ss1/4-6 ss3/8-6 1 [25.4] ss4-8 ss6-8 ss8-8 ss8-8l ss10-8 ss1/4-8 ss3/8-8 1-1/4 [31.8] ss4-10 ss6-10 ss8-10 ss8-10l ss10-10 ss1/4-10 ss3/8-10 1-1/2 [38.1 ss4-12 ss6-12 ss8-12 ss8-12l ss10-12 ss1/4-12 ss3/8-12 1-3/4 [44.5] ss4-14 ss6-14 *ss8-14 *ss8-14l *ss10-14 *ss1/4-14 *ss3/8-14 2 (50.8] ss4-16 ss6-16 ss8-16 ss8-16l ss10-16 ss1/4-16 ss3/8-16 2-1/4 [57.2] - - *ss8-18 *ss8-18l *ss10-18 *ss1/4-18 *ss3/8-18 2-1/2 [63.5] - - *ss8-20 *ss8-20l *ss10-20 *ss1/4-20 *ss3/8-20 2-3/4 [69.9] - - *ss8-22 *ss8-22l *ss10-22 *ss1/4-22 *ss3/8-22 3 [76.2] - - *ss8-24 *ss8-24l *ss10-24 *ss1/4-24 *ss3/8-24 (m-9) "a"=.397.010 [10.10.25] "b"=1/2.010 [12.70.25] part no. (m-2.5) "a"=.120.007 [3.00.18] "b"=1/4.007 [6.40.18] length "l" length tolerance (m-3) "a"=.147.007 [3.70.18] "b"=1/4.007 [6.40.18] (m-4) "a"=.175.007 [4.40.18] "b"=1/4.007 [6.40.18] (m-4) "a"=.175.007 [4.40.18] "b"=3/8.007 [9.50.18] "a"=.200.010 [5.10.25] "b"=3/8.010 [9.50.25] (m-6) "a"=.266.010 [6.80.25] "b"=1/2.010 [12.70.25] .015 [0.38] .020 [0.51]
|
